混凝土試體研磨機
Concrete specimen grinding machine
台灣 YENSTRON 研士強
 

YS/5104單混凝土試體研磨機
YS/5104 Single Concrete specimen grinding machine
每次可以研磨圓柱試體: ∮100×200 mm 1個，或∮120×240 mm 1個，或∮150×300 mm 1個

YS/5108雙-三混凝土試體研磨機
YS/5108 Dual-Three Concrete specimens grinding machine
每次可以研磨圓柱試體: ∮120×240 mm 1 ~ 2個，
或∮150×300 mm 1 ~ 2個，或∮100×200 mm 1 ~ 3個

規格：
1. YS/5104每次可以研磨圓柱試體:
    ∮100×200 mm 1個，或∮120×240 mm 1個，或∮150×300 mm 1個；
     螺紋式研磨盤: ∮175 mm

    YS/5108每次可以研磨圓柱試體:
    ∮120×240 mm 1 ~ 2個，或∮150×300 mm 1 ~ 2個，或∮100×200 mm 1 ~ 3個；
    螺紋式研磨盤: ∮200 mm
2. 具試體自動水平進料裝置: 無段式調整進料速度0 ~ 2 mm/min，
    亦可變換為手動方式進料。
3. 試體研磨時間視進料速度而定。每次試體研磨完成時間約10 ~ 60秒。
4. 研磨盤迴轉數約1800 ~ 2000 rpm/ 60 Hz。
5. 研磨方式: 溼式 (水冷式自動供水)。
6. 垂直研磨盤自轉及弧形搖擺方式。
7. 研磨平面度: ±0.05 mm/ 152 mm。
8. V型固定台水平移動，機台底座有4個回輪裝置供機體移動。
9. 研磨部具不鏽鋼製前罩、水槽及壓克力安全護板。
10. 具自動停止研磨定時器0 ~ 6分。
11. 保護裝置: 緊急停止裝置、過載保護開關。
12. 操作面板各部功能以印刷方式標示清楚。
13. 具手動泵浦給油，潤滑輸送滑軌。
14. 尺寸：約W67 x D107 x H117 cm
15. 電源: AC 220 V、60 Hz、三相、750 W

選購配件:
(1)YS/5104-1立方試體夾具(適用兩種型號)，每次可研磨 50×50×50 mm立方試體 1個；
(2)YS/5108-1 鑽心試體夾具(僅適用型號: YS/5108)，
    每次可研磨∮50×100 mm ~ ∮75×150 mm 鑽心試體 2 ~ 3個。

Specimen grinding machine
Brand:YENSTRON      Made in Taiwan

Used to grind and polish concrete specimens.
Proposed in two versions:
YS/5104 Single Concrete specimen grinding machine
YS/5108 Dual-Three Concrete specimens grinding machine

◆  General Description:
YS/5104 Single Concrete specimen grinding machine
Grinding cylinder capacity: one of ∮100×200 mm
                                        or one of ∮120×240 mm
                                        or one of ∮150×300 mm
                                        Grinding wheel diameter: 175 mm

YS/5108 Dual-Three Concrete specimens grinding machine
Grinding cylinder capacity: one to two of ∮120×240 mm
                                        or one to two of ∮150×300 mm
                                        or three of ∮100×200 mm
                                        Grinding wheel diameter: 200 mm

◆   Specifications:
     1.Automatic feed in horizontal direction.
       Stepless feeding speed regulation: 0 ~ 2 mm/min
       Or change to hand operated feed
     2.Grinding time depends on the feeding speed
        Average grind finish time: 10 ~ 60 sec
     3.Grinding wheel speed: 1800~2000 rpm/ 60Hz
     4.Grinding type: Wet-type (Water-cooled, Automatic feed water)
     5.Grinding wheel vertical spin with arc action
     6.Grinding flatness: ±0.05 mm/ ∮152 mm
     7.Move the grinding machine with four wheels
     8.Stainless steel cover and coolant tank and
        Acrylic protection plate at grinding position
     9.Automatic stop timer: 0 ~ 6 min
     10.Safety device: Emergency stop button, Overload protection
     11.Hand operated lubrication oil pump used to lubricate the track
     12.Power: AC 220 V, 60 Hz, 3ph, 750 W
     13.Size:W67 x D107 x H117 cm
     14.Complete with clamping elements for cylinder ∮100 ~ ∮150 mm

◆  Optional Accessories:
    YS/5104-1 (for both models) Clamping device for one of 50 mm cube
    YS/5108-1 (only for YS/5108) Clamping device for one to three of 
    50×100 mm ~ ∮75×150 mm core