DTEB-200 To DTEX-2000 張力計(數字型) DTEB-200 To DTEX-2000
DTEB-200 To DTEX-2000
張力計(數字型) DTEB-200 To DTEX-2000
Electronic Tesion Meters Model: DTEB-200 To DTEX-2000
廠牌：代理
供應商：大台北尖端儀器有限公司
聯絡電話：02-2531-0981
| 快速詢價 |
小尺寸測量頭的特殊結構設計適用於測量空間狹小或者纖維排列密集的場合 這些型號的張力計被推薦於應用於 標準型號DTMB和DTMX無法應用於的測量的場合
性能特點 ：
1. 向前翻捲的邊條使行進中的纖維容易進入到輪槽內
2. 測量頭長度約59mm
3. 裝有微型滾珠軸承，V型槽導向輪
4. 校正材料為聚酰胺單根長絲
5. 可根據客戶提供的樣品進行單獨校正
標準特性：
l 一切盡收眼底
導向輪
測量材料
讀數
l 導線架和導向輪移動裝置確保運動材料易於導入
l 帶有球軸承的V型導向輪
l 防滑鋁外殼
l 電池供電
l CE認證（電磁適應性試驗）
l 對電子放電所產生的衝擊和損害具有防護功能
l 附有標準報告的測試報告
可選型號
|
型號 |
張力範圍 cN |
測量頭寬 mm |
校正材料 |
|
DTEB-200，DTEX-200 |
2-200 |
38 |
PA： 0.12毫米O |
|
DTEB-500，DTEX-500 |
5-500 |
38 |
PA： 0.20毫米O |
|
DTEB-1000，DTEX-1000 |
50-1000 |
38 |
PA： 0.30毫米O |
|
DTEB-2000，DTEX-2000 |
200-2000 |
38 |
PA： 0.50毫米O |
導向輪
|
|
最大線速度 |
導向輪材質 |
|
標準 |
900 |
硬化鋁（No.R10010） |
|
選項K |
2000 |
硬化鋁 |
|
選項T |
450 |
黑塑料（POM） |
|
選項W |
450 |
鍍鎳鋼 |
|
配件 |
|
選項L（標準量程2-20daN） |
|
|
|
選項L |
省力槓桿（DTEB-20K和DTEB-50K標準配置） |
|
推薦型號DTEB-10K |
規格
|
精確度 其餘量程和不同於校正材料時 |
最佳量程（滿量程的10%-90%）的精度 ±0.5%的滿量程或±1個刻度盤刻度 ±3%的滿量程或±1個刻度盤刻度 |
|
過載量（約） |
15%的滿量程，無精度保證 |
|
過載保護 |
100% |
|
測量原理 |
應變測量電橋 |
|
測量輪偏差 |
最大0.2mm |
|
信號處理 |
數字式 |
|
測量頻率 |
62次/秒 |
|
顯示 |
4位LCD，12mm字高 |
|
刷新速度 |
0.5-1-2或4秒可選 |
|
|
最後，最小，最大，峰值 |
|
溫度範圍 |
10-45℃ |
|
空氣濕度 |
最大相對濕度85% |
|
電源 |
4*號AA電池1.5伏特（大約可持續使用20小時） |
|
外殼材料 |
模鑄鋁質 |
|
外殼尺寸 |
235*76*45(長*寬*高) |
|
淨重（毛重） |
型號-10K680g(1500g) 型號-20K-L及更高量程1000g(2200g) |
|
型號DTEX的額外規格 |
|
|
擴充記憶體 |
最大100筆讀值, 最大, 最小和峰值以及平均和標準誤差值 |
|
數據輸出信號 |
RS 232 C (4800, 8, N, 2) |
|
類比輸出信號 |
0 - 1 V DC (轉換率 16 ms) |
|
數字化運算 |
Mitutoyo |
4 Tension ranges from 2 - 200 cN to 200 - 2000 cN
Tension meter with turned-up finger edges for easy thread
Special Features
- Turned-up outer finger edges guide the running filament into the roller grooves
- Length of measuring head approx. 59 mm
- Hand-held unit with small, V-grooved guide rollers, ball-bearing mounted
- Tension meter model DTEX is calibrated using only PA monofilament!
- Calibration to customer supplied material is available
- The design is otherwise according to model DTMB respectively model DTMX, but no material thickness compensator
Standard Features
- Everything in operator’s view:
- the guide rollers
- the measured material
- the readings - Roller shifting mechanism ensure easy acquisition of the running material
- Ball-bearing mounted, V-grooved guide rollers
- Tension meter with rugged aluminium housing
- Battery operated (AC adapter for continuous operation available)
- Certificate of Compliance with the order 2.1 according EN 10204 is included
- Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
Available Models
| Model | Model | Tension Range cN |
Resolution | Measuring Head Width* mm |
SCHMIDT Calibration Material PA** |
| DTEB-200 | DTEX-200 | 2.0 - 200.0 |
0.1 cN |
38 |
PA: 0.12 mm O |
| DTEB-500 | DTEX-500 | 5.0 - 500.0 |
0.1 cN |
38 |
PA: 0.20 mm O |
| DTEB-1000 | DTEX-1000 | 50 - 1000 |
1 cN |
38 |
PA: 0.30 mm O |
| DTEB-2000 | DTEX-2000 | 200 - 2000 |
1 cN |
38 |
PA: 0.50 mm O |
Specifications
| Model DTEB: | |
| Calibration: | According to SCHMIDT factory procedure |
| Accuracy: | From 10 % up to 90 % of tension range: ±0.5 % full scale and ±1 digit remaining tension range and other calibration material: ± 3% full scale and ±1 digit |
| Overrange: | Approx. 15 % full scale, without accuracy guarantee |
| Overload protection: | 100 % of tension range |
| Measuring principle: | Strain gauge bridge |
| Measuring roller deflection: | 0.2 mm max. |
| Signal processing: | Digital |
| Measuring frequency: | 62 Measurement/s |
| Converter: | 12 bit A/D |
| Temperature coefficient: | Gain: less than ±0.01 % full scale/oC Zero point: less than ±0.3 % full scale/oC |
| Display: | LCD 4 digit, 12 mm high |
| Display update rate: | Adjustable 0.5, 1, 2 or 4 s (averaging) |
| Field adjustment: | ±7 steps in 1.5 % increment |
| Memory: | MIN, MAX, PEAK and last value |
| Temperature range: | 10 - 45 oC |
| Air humidity: | 85 % RH, max. |
| Power supply: | 4 Batteries 1.5 V, size AA (approx. 20 h continuous use) |
| Auto power off: | After 2 minutes of non-use |
| Housing material: | Die-cast aluminium |
| Housing dimensions: | 235 x 76 x 45mm (LxWxH) |
| Weight, net (gross): | Approx. 680 g (approx. 1500 g) |
Expanded memory: |
Additional specifications of model DTEX: Max. 100 readings, MAX, MIN and PEAK values as well as average and standard deviation |
| Digital output signal: | RS 232 C (4800, 8, N, 2) |
| Analog output signal: | 0 - 1 V DC (converter rate 16 ms) |
| Digimatic interface: | Mitutoyo |
產品關鍵字：
