P320 控制器可存儲 9個複合程式, 每組程式最多有8段.  編 輯程式可實現額外功能 (如排氣扇或催化裝置).  一個可編輯程式的音頻信號在保溫段結束會發出警報, 這是一個標準功能.  另外, 數位介面 RS422 也是標準配置.

The Controller P 320 can be used to store up to 9 complex programs, each with up to 8 segments. Depending on the program, an extra function can be used (e.g. outlet fan or catalyst). Also a programmable acoustic signal which is activated after the holding time has passed is a standard function, in addition to the digital interface RS 422.

C18 程式控制器可作為我們熔融爐的標準控制器.  它有個積分式的7天計時器, 符合鑄造要求.  積分式的階梯狀控制可自動調節熔化溫度至電爐溫度, 因此熔化時不會過熱.

The program controller C18 is used as a standard controller for our melting furnaces. It has an integrated 7-day timer and is geared to the requirements of foundries. The integrated cascade control automatically adjusts the melting temperature to the furnace temperature, so your melts don't overheat.

中文規格說明

C40 程式控制器是在 C30 的基礎上開發的.  它是為使控制器能安裝在自立式或嵌牆式櫃內而設計的.  這種專業程式控制器提供了2個額外功能, 可以控制多區的配電裝置和控制裝置.

The program controller C 40 is based on program controller C 30. It is designed for installation in a free-standing or wall-mounted cabinet. This professional program controller offers 2 extra functions and can also control multizone switchgear and controlgear.

 中文規格說明  
下載 PDF 檔案產品目錄 C-7-16   

C6 程式控制器是多種實驗室用電爐配備的基本型內嵌 入式控制器.  與其他型號的控制器一樣, 它具有PID 控制參數.  加熱曲線可設定, 在電爐關閉前可自動保持工作溫度.

This program controller is our basic built-in controller for many laboratory furnaces. Just like its big brother, it has PID control parameters. The heating-up ramp is variable, the operating temperature is held automatically until the furnace is switched off.

中文規格說明 

C3 程式控制器是專門為陶瓷焙燒設計的.  它極易操作, 並提供兩個可存儲的程式 (素瓷和瓷釉).  它是陶瓷窯的標準配置.

This program controller was specially developed for the firing of ceramics. It is very easy to operate and offers two stored programs (bisque and glaze). It is the standard model for our ceramics kilns.

下載 PDF 檔案產品目錄 C3-C7 

S27 控制器是專門為牙科預熱窯設計的, 可輕鬆存儲多達9個程式, 透過程式可對廢氣催化裝置和音頻信號進行設置.

The program controller S 27 is specially designed for our dental preheating kilns. Up to 9 programs can be entered easily and straightforwardly. An exhaust-air catalyst and an audible signal can be set via the program.

中文規格說明  
  下載 PDF 檔案產品目錄 S27   

C42 控制器在C40 控制器的基礎上加入特殊的控制參數, 因此也能控制快燒窯爐.

The program controller C42 is identical in design to model C40, however, it has special control parameters to control fast kilns/furnaces as well, e.g. our high-temperature kilns and furnaces.

中文規格說明  
下載 PDF 檔案產品目錄 C7_16   

經標準 C6 控制器改裝的 C6D 控制器多了一個設置保溫時間的功能.

The C 6D controller is based on the standard controller C 6 and ffers, in addition to the features of the C 6, a settable hold time

中文規格說明  
下載 PDF 檔案產品目錄 C7_16   

C7 程式控制器同樣是專門為納博熱機的窯爐設計的, 操作非常方便.  除了用於素瓷和瓷釉焙燒的3個程式, 該控制器還可設定一條冷卻曲線.

This program controller was likewise developed specially for our kilns. In addition to 3 programs for bisque and glaze firing, a defined cooling ramp can also be set on this easy-to-operate controller.

中文規格說明  
下載 PDF 檔案產品目錄 C3-C7   

B170 這種PID控制器操作簡便, 能滿足許多實驗室對常規電爐的應用要求, 包括可設置加熱曲線, 保溫溫度和持續時間.

This PID-Controller is simple to operate with digital setting and display and fulfil many general furnace laboratory application requirements. Features include adjustable heating ramps, holding temperatures and duration.

C100 控制器是為了滿足甚至是最嚴格的要求而開發的.  標準化設計, 幾乎可控制任何 納博熱機的爐型, 且操作簡便.  大螢幕以圖表形式顯示程式.  當然, 它也配備了介面連接和幾個可獨立編輯的額外功能.

Controller C 100 was developed to meet even the most exacting demands. It is of a modular design, can control almost all types of kiln/furnace, but is nevertheless easy to operate. Programs are shown in tabular or graphic form on a big display. Naturally, it is also equipped with an interface connection and several extra functions which can be programmed individually.

中文規格說明  
下載 PDF 檔案產品目錄 C100   

C30 程式控制器可滿足納博熱機的窯爐對工藝控制的最高要求.  它最多可含8個程式, 每個程式有18個片段, 可保存在表格中.  它能 透過程式控制增加的額外裝置 (例如音頻警報或冷卻風扇) 以提供額外功能, 並可獨立設定以滿足熱處理工藝要求.  另外, 為強化程式控制器, 它還配備了介面連接埠. 

The program controller C 30 meets the highest demands in the process control of your kiln or furnace. Up to 8 programs with 18 segments can be saved in tabular form. It offers an extra function for programmable control of extra functions (e.g. audible alarm or cooling fans) connected to the kiln/furnace, and can be set individually to the requirements of the heat treatment process. And, to round off the features of this program controller, it is also equipped with an interface connection.

中文規格說明  
下載 PDF 檔案產品目錄 C7-16   

C5 是用於眾多納博熱機標準電爐的基本控制器.  它易於操作, 並提供一條可設置的加熱曲線和一段保溫時間.

The C5 is used as the basic controller for many standard furnaces. It is very easy to operate and offers one settable heating-up ramp and one holding time.

中文規格說明  
下載 PDF 檔案產品目錄 C7-16