PT-100 手持式電子張力計 PT-100
PT-100
手持式電子張力計 PT-100
Electronic pocket tension meter for measuring low tensions of fibres, yarns
廠牌：代理
供應商：大台北尖端儀器有限公司
聯絡電話：02-2531-0981
| 快速詢價 |
手持電子張力計用於測量低張力的纖維和紗線等等。大部分用於循環編織機器。
有著小型測量頭的手持式裝置適合進入受限的空間應用，質量輕巧。
特點:
l 圓椎狀的導向輪使得材料易於導入且便於旋轉儀器
l 在每一個測量姿勢皆可自動歸零設定
l 左右手皆可操作使用
l 可調式電子阻尼提供穩定的張力讀值
l 當一連串的測量結束時會顯示平均值
l 帶有球軸承的V型導向輪
l 測量單位cN與 g 可轉換
l 測量頭寬度24mm(導向輪外部距離)
l 可充電式鋰電池(連續使用約40小時)
標準特點:
l 小型緊密的鋁製外殼
l 便於單手操作
l LCD顯示易於讀值
l 每台儀器皆以最高精度個別校正過
l CE認證（電磁適應性試驗）
l 對電子放電所產生的衝擊和損害具有防護功能
l 附有標準檢驗報告及校正報告
可選型號
|
型號 |
張力範圍 cN |
測量範圍速度 |
測量範圍長度 |
校正材料 ** |
|
PT-100 |
0.5-100 |
-------- |
-------- |
PA： 0.12毫米φ |
|
PT-100-L |
0.5-100 |
0 - 1999 米/分鐘 |
0 - 1999 米 |
PA： 0.20毫米φ |
|
導向輪 |
|
|||
|
|
最大線速度 米/分鐘 |
導向輪材質 |
|
標準 |
2000 |
硬化鋁 |
|
|
精確度 |
最佳量程（滿量程的10%-90%）的精度 ±1.5%的滿量程或±1個刻度 |
|
過載保護 |
200%滿量程 |
|
測量單位 |
cN或 gr可轉換 |
|
測量原理 |
應變測量電橋 |
|
阻尼 |
可調式電子阻尼 |
|
顯示 |
3½位LCD，9mm字高 |
|
刷新速度 |
每秒2次 |
|
自動關機 |
待機三分鐘後關閉 |
|
溫度範圍 |
10-45℃ |
|
空氣濕度 |
最大相對濕度85% |
|
電源 |
鋰蓄電池（大約可持續使用40小時，充電時間約3.5小時） AC 適配器 100 - 240 V AC 附三國轉接頭 (EU/USA/UK) |
|
外殼材料 |
模鑄鋁質 |
|
外殼尺寸 |
141 x 36 x 22 mm (長*寬*高) |
|
淨重（毛重） |
約170克(約500克) |
Measuring Range 0.5 - 100.0 cN
Electronic pocket tension meter for measuring low tensions of fibres, yarns. etc. Mostly used on circular knitting machines etc.
Hand-held device with small measuring head for applications with limited access space
Handy tension meter with low wight
Special Features
- Easy Slide-In material threading by cone shaped guide roller and turning the instrument
- Automatic »zero setting« in each measuring position
- Can be used for right and left hand use
- Adjustable electronic damping to provide steady tension readings
- When the series of measurement ends, the average value can be displayed
- Ball-bearing mounted, V-grooved guide roller
- Switchable measuring units cN and g
- Measuring head width 24 mm (outer distance of guide rollers)
- Rechargeable LiPo battery (approx. 40 h continous use)
- Tension meter with small, compact aluminium housing
- Easy one hand operation
- Tension meter with easy to read LCD display
- Each instrument is individually calibrated for highest accuracy
- CE proofed, interference resistance about static charge
- Certificate of compliance with the order 2.1 according DIN EN 10204 is included
- Optionally available: Inspection Certificate 3.1 according DIN EN 10204 with calibration report (tension only)
|
Model |
Measuring Range |
Measuring Range |
Measuring Range |
SCHMIDT |
|
|
PT-100 |
0.5 - 100.0 cN |
--- |
--- |
PA: 0.12 mm Ø |
|
|
alternative |
|||||
|
PT-100-L |
0.5 - 100.0 cN |
0 - 1999 m/min |
0 - 1999 m |
PA: 0.12 mm Ø |
Guide Rollers
|
Order-Code |
Line Speed |
Roller material |
|
Standard |
2000 |
Hardcoated aluminium |
Specifications
|
Calibration: |
According SCHMIDT factory procedure |
|
Accuracy: |
±1.5 % full scale ±1 digit |
|
Overload protection: |
200 % full scale |
|
Measuring units: |
cN, gr switchable |
|
Measuring principle: |
Strain gauge bridge |
|
Damping: |
Adjustable electronic damping, averaging |
|
Display: |
LCD 3 ½ digits, 9 mm high |
|
Display update rate: |
2 times per second |
|
Auto power off: |
After 3 minutes off non use |
|
Temperature range: |
10 - 45 ºC |
|
Air humidity: |
85 % RH, max. |
|
Power supply: |
LiPo accumulator (approx. 40 h continous use, charging time approx. 3.5 h) and |
|
Housing material: |
Aluminium |
|
Dimensions: |
141 x 36 x 22 mm (LxWxH) |
|
Weight, net (gross): |
Approx. 170 g (approx. 500 g) |
產品關鍵字：
