FS-02-D 底部加熱式醱酵槽
FS-02-D
底部加熱式醱酵槽
Dry Heating System with Single Wall Plain Bottom Vessel and Heating Base Unit
廠牌：Winpact
供應商：伯新科技股份有限公司
聯絡電話：037-582882
相關網頁
| 快速詢價 |
行動條碼QR Code
-
堅固槽體適用於例行性與繁重的實驗
-
彩色觸控螢幕與圖像化使用者介面讓操作變得容易
-
即時的曲線趨勢資料紀錄確保最佳的醱酵表現
-
二階溶氧策略可對溶氧做精密的控制
-
乙太網路遠端控制讓您可從電腦上對醱酵過程做瀏覽與操作
-
無須額外的軟體
-
低電壓直流無刷馬達
-
快速連接器讓操作變得容易
-
4個內建的可指定與可程式化的蠕動幫浦可自動做酸鹼值、消泡與饋料控制
-
大範圍溫度控制, 最多到 90°C (194°F)
-
自動流程讓你可以設立15個步驟的可程式化控制
-
手動流程讓你可以獨立地執行個別參數
-
提供大型接種孔做為方便的通道
-
完整的配件可當作標準包裝來提供
 |
|
| Vessel | Working volume (Liter) | 3L | 5L | 7L | 10L |
| Total volume (Liter) | 3.7 | 6.5 | 9.1 | 13 | |
| Material | Borosilicate glass / 316L stainless steel for headplate and all fittings | ||||
| Control Unit | Control panel | 10.4" Colorful touch-screen interface | |||
| Communication port | Remote control through Ethernet (SCADA) | ||||
| Data export through USB port | |||||
| RS-485 port for system extension | |||||
| Program storage | Up to 59,994 process programs | ||||
| Log data storage | Up to 10 process monitoring data files | ||||
| Cabinet material | ABS front panel and painted iron housing | ||||
| Dimension | Footprint: W400 x D500 mm (15.75" x 19.69") | ||||
| Height = 740 mm (29.13") | |||||
| Rated voltage | 110V or 220V ; 50/60 Hz | ||||
| Aeration | Inlet gas flow-meter | 0, 1-10 LPM | 0, 2-20 LPM | ||
| Sparger | Orifice ring | ||||
| Baffle | Removable 316L stainless steel baffles | ||||
| Temperature | Heating | Bottom heating plate (Base unit) | |||
| Cooling | Cooling coil | ||||
| Range | 5°C (41°F) above coolant up to 90°C (194°F) | ||||
| Resolution | 0.1°C | ||||
| Probe | Platinum RTD probe (Pt 100) | ||||
| Control mode | Programmable 15 steps PID control | ||||
| Agitation | Drive | Removable top brushless motor | |||
| Speed range | Two agitation motor types: | ||||
| a. For fermentation and cell culture: 30 - 1,200 rpm | |||||
| b. For shear-force sensitive cell culture line: 5 - 300 rpm (optional) | |||||
| Resolution | 1 rpm | ||||
| Impeller | 3 pcs of adjustable of Rushton-type impellers | ||||
| Control mode | Programmable 15 steps PID control | ||||
| pH | Range | 2 -14 pH | |||
| Resolution | 0.01 pH | ||||
| Probe | Gel-filled electrode: Autoclavable | ||||
| Control mode | PID, One point control with adjustable dead band | ||||
| DO | Range | 0 - 200% | |||
| Resolution | 0.1% | ||||
| Probe | Polarographic DO sensor; Autoclavable | ||||
| Control mode | Cascade function to response to | ||||
| a. Increase or decrease agitation speed | |||||
| b. Oxygen enrichment module (optional) | |||||
| c. Start substrate feeding program | |||||
| ORP | Measurement range | -/+ 2000mV | |||
| Resolution | 1 mV | ||||
| Probe | Gel-filled electrode: Autoclavable (optional) | ||||
| Foam | Probe | 316L stainless steel protector with insulated telfon tube; | |||
| On/Off control | |||||
| Peristaltic pump | Pump number | 4 Built-in pumps; One external pump (optional, RS-485 interface with relay output) | |||
| Motor type | Precise stepping motor; minimum speed is 1 rpm | ||||
| Speed range | 0 - 65 rpm | ||||
| Resolution | 1 rpm | ||||
| Control mode | Programmable 15 steps feeding control; | ||||
| Pump can be assigned for Acid, Base, Antifoam and Substrate | |||||
| Exhaust | Device type | 316L stainless steel condenser | |||
| Utility requirement | Power Supply | 100-120V 50/60Hz or 210-230V 50/60Hz with electrical safety cutoff switch | |||
| Water | 2 Bar maximum (29 psi) | ||||
| Air | 1 Bar maximum, must be dry, oil-free and filtered (14.5 psi) | ||||
| Autoclave | For sterilization | ||||
| Cat. No | Description |
| FS-02-D03P-110/220V | Complete Dry Heating Fermentation System for 3L Single Wall Plain Bottom Vessel, 110V/220V |
| FS-02-D05P-110/220V | Complete Dry Heating Fermentation System for 5L Single Wall Plain Bottom Vessel, 110V/220V |
| FS-02-D07P-110/220V | Complete Dry Heating Fermentation System for 7L Single Wall Plain Bottom Vessel, 110V/220V |
| FS-02-D10P-110/220V | Complete Dry Heating Fermentation System for 10L Single Wall Plain Bottom Vessel, 110V/220V |
| Dry Heating System with Single Wall Plain Bottom Vessel and Heating Base Unit includes: | |
| Controller | Dry Heating System Controller |
| Built-in rotameter | |
| 4 x built-in pump head | |
| Vessel | Single wall plain bottom vessel (includes glass body, head plate, T handing bar, 2 probe adaptors) |
| 3 pcs of adjustable Rushton-type impeller | |
| Baffle assembly | |
| Condenser assembly | |
| Air sparger | |
| Motor | Agitation motor |
| Probes | 1 x pH probe and 1 x pH cable |
| 1 x DO probe and 1 x DO cable | |
| 1 x temperature probe and 1 x temperature cable | |
| 1 x foam/level sensor and 1 x foam/level sensor cable | |
| Start-up Kit | Includes 4 x 250 ml glass feeding bottles, 1 x 500ml glass feeding bottle, 10 x 45 mm 0.2 µm autoclavable disc type filters, 15 x connecting tubes, 20 x silicon tubing clamps, 25 ft of 1/8 inch (3.1 mm) silicon tube, 1 x handy burner, 1 x 2 mm hex wrench, and 1 x 12 mm & 14 mm double open-end wrench |
