Standard electric actuators – two position

Position indication
Manual control
Remote control by contact closures or TTL level logic
110 VAC
24 VDC (CE certified) with universal 110/230 power supply
No power demand on the chromatograph

Product numbers

Select to jump to product numbers:

110 VAC models
24 VDC models

The two position standard electric actuator is a complete system, including interface cable, power cord, and manual controller assembly with position indication. The actuator may be operated manually by a toggle switch or automatically by any data system with momentary contact closures or 5 VDC negative true logic outputs. (For more information on control options, refer to Technical Note 417.)

An actuator can be specified with closemount hardware, with a 2”, 3”, 4”, or 6” standoff, or with just the standoff mounting hardware, if your valve already has a standoff. Valves which will be mounted in ovens require a standoff assembly, which locates the actuator out of the heated zone.

If you are converting a manual valve to electric actuation and have any doubts about which actuator and hardware you need, contact our technical staff for assistance.

Download an instruction manual

View a manual in pdf format. (To download a manual, right click this link and save the file to your computer. Go here for more about viewing the manuals.)

Further reference

Declaration of CE Compliance
Mounting hardware
What mounting hardware do I need?
Closemount hardware
Standoff assembly
Right angle drive
Other two position actuators
Microelectric
Air

Two position electric actuators - 110 VAC

The number in parenthesis indicates the angle that the actuator must turn to move the indicated valve from one position to the other. If you have an older valve with a visible coil spring, order a 90° actuator for 3, 4, 6, and 8 port valves, or a 60° actuator for 10 and 12 port valves.