廠牌:TOMY 日本
供應商:智勤企業有限公司(超低溫冷凍櫃/生物安全櫃/離心機/滅菌鍋/CO2,O2培養箱/化學工作台)
聯絡電話:02-23955078 07-3451553
快速詢價 |
最大轉速: 10,000 rpm
最大RCF: 11,850G
最大處理量: 1,000ml (4 x 250ml) (AX-511/501)
1,536ml (8 x DW plate) (AX-521)
Activating the power-saving [ECO] mode can also help reduce the power consumption during the waiting time (standby cooling) by allowing the temperature control bands to be changed.The chamber can cool down to the set temperature within approximately 3 minutes and a half (*) after release from ECO mode.
* Under the conditions: set temperature of 4℃ at an ambient temperature of 25℃.
All angle rotors can be spun maximum 10,000rpm
Initial values for acceleration and deceleration characteristics are set from 0 to 500rpm, however, they can be varied up to maximum speed in 100rpm increments by function settings.
The AX-521/511/501, with the ability to accommodate micro tubes to 250ml bottles or deep well plates, is ideal for wide range of applications. Using an optional bucket cap kit B433*, various types of rotors including swinging bucket rotors of biohazard-proof can be mounted.
Convenient flashing function allows operation with preset centrifuging conditions.
*Bucket cap kit B433 is an optional kit.
This highly sealed rotor, which has been tested and certified by the Health Protection Agency (HPA, UK) to be compliant with the International Standard (Annex AA of the IEC 61010-2-020), meets requirements for biohazard safety. [Bucket cap kit B433] is an optional kit.
More compact in design, compared with existing high capacity refrigerated.centrifuge, is one of the many advantages of the AX series.
AX Series are ideally suited for applications where space is limited.
Easy-to-see LCD monitor display shows various information including remaining run time, error messages, rotor types in use and records of centrifugal operation. The monitor can display in English or Japanese. (AX-521)
Dual color LED display allows the user to monitor the operation status just by looking the display; red indicates that the rotor is spinning while green indicates the rotor is stopped.
Innovative Flex-Spin system employed to maintain safe and efficient centrifugal operation allows a margin of error and eye-balancing of sample tubes.
*Some rotors are excepted.
With a single knob push, the rotor can be quickly and securely fixed.
*Some rotors are excepted.
The Flex-Spin Drive features a flexible motor shaft that equalizes minor imbalances without damaging the centrifuge or triggering the imbalance protection system. This allows excellent tolerance for minor differences in sample volumes.
Model | AX-521 | AX-511 | AX-501 |
Maximum Speed | 10,000rpm | ||
Maximum RCF | 11,850G | ||
Maximum Capacity | 1,536ml (Deep-well plate x 8) | 1,000ml (250ml x 4) | |
Control System | Microprocessor control (feedback system) | ||
Drive Motor | Induction motor | ||
Drive System | Flex-Spin drive system (Direct drive with an automatic alignment function) | ||
Data Entry | Jog Dial equipped with an button | ||
Temperature Setting Range | From -9℃ to +35℃ (1℃ increment) | ||
Speed Setting Range | 100 to 10,000rpm (100rpm increments) | ||
RCF Setting Range | 10 to 11,850G (10G increments for the range less than 300G, 100G increments for the range over 300G) |
||
Time Setting Range | From 10 sec to 50 sec, in 10 sec increments, from 1 min to 99 min, in 1 min increments or for free |
||
Safety Devices | • Imbalance detector, • Lid interlock, • Lid open/close detector, • Abnormal speed detector, • Over-current circuit breaker, • Rotor identification system, • Motor over-current detector, • Abnormally high or low chamber temperature detector |
||
Additional Functions | • Three-step acceleration characteristics selection, • Three memory function, • Three-step deceleration characteristics selection, • FLASH (momentary spin) function, • Memory function for last run parameters, • BART Code selection, • Power saving (ECO) mode |
||
Refrigerant | HFC R404A (270g) | HFC R404A (260g) | HFC R404A (250g) |
Rated Current | 120V : 12A, 220/230/240V : 6A | 120V : 10A, 220/230/240V : 5A | |
Power Requirements | 1-Phase 50/60Hz AC120V 15A, 1-Phase 50/60Hz AC220/230/240V 8A | ||
Power Consumption(Heat output) | 970W (834kcal/h) | 960W (826kcal/h) | 760W (654kcal/h) |
Breaker | Rated breaking current 120V : 15A, 220/230/240V : 7.5A | ||
Protection Against Electric Shock | Class I | ||
Dimensions (except protruding portion) |
540W x 597D x 858H mm, (table height; 750mm) |
510W x 567D x 858H mm, (table height; 750mm) |
462W x 540D x 858H mm, (table height; 750mm) |
Net Weight | 111kg (120V) 116kg (220/230/240V) |
107kg (120V) 112kg (220/230/240V) |
99kg (120V) 104kg (220/230/240V) |
Environmental Requirements | Ambient temperature range:10 to 35℃, Relative humidity:30 to 85%, Atmospheric pressure:700 to 1,060hPa Intended exclusively for use indoors, Overvoltage category: II, Pollution degree: 2 |
||
Accessories Included | • Operator's manual 1, • Warranty Card 1, • BART Cord table 1, • Clear storage case for operator's manual 1, • Attaching screw for clear storage case 1, • Power cord×1pc., • Spanner 1, • Level gauge 1, • Rotor locking knob 1, • Drain plug 1 |
※Specifications and design are subject to change for improvement without prior notice. Please ask for the latest specifications prior to your order and procurement.
連結原廠
http://www.digital-biology.co.jp/manufactured/products/ax/