EcoFlex™ 標準氣體產生器
行動條碼QR Code
•最多可容納8個直徑最大為 6英寸x¼英寸（KIN-TEK HRT，SRT和EL )滲透管
•溫度顯示分辨率：0.1˚C
•標準流量範圍：0.25-5.0 liter/min
•流量：±1.5％
•輸出濃度範圍：低於1 ppb至超過1000 ppm（取決於滲透管排放速率和稀釋流量）
•Modes of Operation: span only
•Flow path suitable for reactive gases – mixture contacts only glass, Teflon® and stainless steel (other materials available)
•Accepts disposable permeation tubes, diffusion tubes, wafer tubes, and prefilled gas fed permeation tubes
•Accepts up to 8 disposable tubes with maximum 6 inch length x 1/4 inch diameter (KIN-TEK HRT, SRT and EL tubes), or Accepts one of KIN-TEK refillable LFH, or Prefilled 57S
•High mass oven with electronic PID control
•Temperature Control Range: 5 °C above ambient from 30 to 150 °C (heat only)
•Temperature Set Point Resolution: 0.1 °C across control range
•Temperature Display Resolution: 0.1 °C
•Standard Flow Range: 0.25-5.0 standard liters per minute
•Flow Control over Calibrated Range: ≤ ±1.5 % of reading
•Output Concentration Range: below 1 ppb to over 1000 ppm depending on permeation tube emission rate and dilution flow rate
•Power Requirements: Standard: 115 VAC, 2 A
•Power Requirements: Optional (specified at time of purchase): 230 VAC, 1 A
•Dimensions: 6 inch Width x 5 inch Height x 20 inch Depth (add 3.5 inch to Depth for front panel inlet filter clearance)
•Weight: Approximately 27 lbs, shipping 44 lbs
產品關鍵字：
.jpg)
