廠牌:其他
供應商:南北貿易有限公司 日東精工分析科技(三菱化學分析科技) 台灣總代理
聯絡電話:04-22994269
| 快速詢價 |
TMA/SS 熱機械分析儀(TMA 7000)
Thermo Mechanical Analyzer / Stress Strain
|
熱機械分析儀(Thermal Mechanical Analyzer) |
TMA7000 |
想了解更多, 歡迎與我們洽詢!!!
| Model name | TMA7100 | TMA7300 | |
| Temperature Range | -170 to 600℃ | Ambient to 1500℃ | |
| Scanning Rate | 0.01 to 100℃/min | ||
| Sample Tube | ㆍQuartz ㆍMetal* ㆍAlumina ㆍQuartz* | ||
| Probe | ㆍQuartz Expansion Probe ㆍQuartz Penetration Probe* ㆍQuartz Cone Probe* ㆍQuartz Tension Probe* ㆍQuartz Bending Probe* (to 500℃) ㆍVolume Expansion Accessory* (Ambient to 200℃) ㆍMetal Tension Probe* |
ㆍAlumina Expansion Probe ㆍQuartz Expansion Probe* (to 1000℃) ㆍQuartz Penetration Probe* (to 1000℃) ㆍQuartz Cone Probe* (to 1000℃) ㆍQuartz Tension Probe* (to 600℃) ㆍQuariz Bending Probe* (to 500℃) |
|
| Probe Supporting Method | Cantilever | ||
| TMA Measurement Range | ±5mm | ||
| RMS noise / Sensitivity | 0.005μm /0.01μm | ||
| Load Range / Resolution | ±5.8N /9.8μN | ±1,47N /9.8μN | |
| Maximum Sample Dimensions | Expansion, Penetration: D 10 x L 25mm Tension: W5 x T1 x L 25mm |
Expansion: D 10 x L 25mm | |
| Sample Length Measurement | Automated Measurement | ||
| Atmosphere | ㆍAir, Inert gas flow ㆍVacuum* (to 13Pa) ㆍSwelling* (to 80℃) ㆍHumidity control* (to 90℃, 90%RH) |
ㆍAir, Inert gas flow ㆍVacuum* (to 13Pa) |
|
| Stress Control Mode | ㆍConstant Loading: ±5.8N ㆍConstant Rate Loading: 9.8 x 10-2 to 9.8 x 106mN/min ㆍSinusoidal Loading: 0.001 to 1Hz ㆍCombination: maximum 40 steps |
||
| Strain Control Mode | ㆍConstant Strain: ±5000μm ㆍConstant Rate Strain Control: 0.01 to 106μm/min ㆍSinusoidal Strain Control: 0.001 to 1Hz ㆍCombination: maximum 40 steps |
||
| Gas Purge Control* | ㆍFlow Meter ㆍGas Control Unit ㆍMass Flow Control Unit | ||
| Cooling Unit | LN2 Dewar Vessel | -170 to 600℃ | N/A |
| Auto Fan Cooling Unit* | Ambient to 600℃ | Ambient to 1500℃ | |
| Auto LN2 Gas Cooling Unit* | -150 to 600℃ | N/A | |
| Electrical Cooling Unit* | -60 to 450℃ | N/A | |
| *Optional | |||