DTMX-200 To DTMX-50K-L 線材用張力計(數字型) DTMX-200 To DTMX-50K-L
DTMX-200 To DTMX-50K-L
線材用張力計(數字型) DTMX-200 To DTMX-50K-L
Electronic Tension Meter for Wire Model: DTMX-200 To DTMX-50K-L
廠牌：代理
供應商：大台北尖端儀器有限公司
聯絡電話：02-2531-0981
| 快速詢價 |
行動條碼QR Code
簡單介紹
根據應用要求例如ISO9000 質量管理體系認證，增加處理數據功能
標準功能 ：
1. 微處理器控制獲得最高測量精度
2. 可靠的應變測量原理
3. 當張力波動時可通過選擇掃瞄速率(0.5, 1, 2或4秒)提供穩定的讀數(電子阻尼)
4. 測量頻率：62測量 單位/秒
5. 在更新間隔t1之間，顯示器累計平均值
6. 具有最小值、最大值和峰值的記憶功能
7. 在張力計多種測量場合允許進行零點調整，以保證最高的測量精度
8. 可根據客戶提供的材料進行兩種不同材料的校正
9. 內置材料線徑補償器，在型號-500cN和更高量程的張力計中，提高變徑後的測量精度
10. 內建安裝孔可固定於線上使用
特性：
l 可儲存除最小值、最大值和峰值以外的100個張力值
l 自動計算平均值和標準偏差 所有這些數值均能顯示，輸送至印表機或存儲在個人電腦上
l 2種記憶模式： 連續存儲或按指令儲存
l 類比和序列介面
l 被測材料選擇開關，設定紡織物與金屬線纜兩種測量模式，確保高測量精度
可選型號
|
型號 |
張力範圍 cN |
測量頭寬度 |
校正材料 紡織行業（PA）單絲 |
應用於紡織行業 例如：紡織指數 |
校正材料***線纜行業 退火軟銅絲 |
應用於線纜行業 例如：軟煉銅絲 |
材料線徑補償裝置 |
|
DTMX-200 |
0.1 - 200.0 |
65 |
0.12毫米O |
max. 200 tex |
0.10毫米O |
max. 0.15 mm O |
|
|
DTMX-500 |
0.1 - 500.0 |
65 |
0.12+0.20毫米O |
20 - 500 tex |
0.16+0.25毫米O |
0.05 - 0.25 mm O |
√ |
|
DTMX-1000 |
50 - 1000 |
65 |
0.20+0.40毫米O |
50 - 1000 tex |
0.25+0.40毫米O |
0.10 - 0.40 mm O |
√ |
|
DTMX-2000 |
200 - 2000 |
65 |
0.40+0.70毫米O |
300 - 2000tex |
0.40+0.60毫米O |
0.30 - 0.60 mm O |
√ |
|
DTMX-2500 |
250 - 2500 |
116 |
0.40+0.70毫米O |
400 - 2500tex |
0.40+0.60毫米O |
0.30 -0.60 mm O |
√ |
|
DTMX-5000 |
500 - 5000 |
116 |
0.60+1.20毫米O |
800 - 5000 tex |
0.60+1.00毫米O |
0.40 - 1.00 mm O |
√ |
|
DTMX-10K |
1.00 - 10.00daN |
116 |
0.80+1.40毫米O |
1500 - 10000 tex |
0.70+1.20毫米O |
0.70 - 1.20 mm O |
√ |
|
DTMX-20K-L |
2.00 - 20.00daN |
216 |
1.20+1.80毫米O |
2500 - 20000 tex |
鋼繩1.5毫米O 鋼繩2.0毫米O |
1.00 - 2.00 mm O |
√ |
|
DTMX-50K-L |
5.00 -50.00daN |
216 |
鋼繩1.5毫米O(7*7*0.2) |
6000 - 50000 tex |
鋼繩2.0毫米O(7*7*0.25) |
1.80 - 2.20 mm O |
|
導向輪
V型槽
|
|
最大線速度 |
導向輪材質 |
|
標準 |
2000 |
硬化鋁（No.R10003） |
|
選項K |
3500 |
硬化鋁 |
|
選項H |
5000 |
等離子硬化鋁 |
|
選項T |
1000 |
黑塑料（POM） |
|
選項W |
1000 |
鍍鎳鋼 |
|
選項ST |
1000 |
硬化鋼 |
|
選項B |
1000 |
調質鋼（應用於鋼簾線） |
|
選項CE |
1000 |
陶瓷 |
|
選項ASY 不對稱槽 |
1000 |
硬化鋁 不帶導線架 |
|
U型槽 |
|
選項U |
2000 |
硬化鋁 |
|
可選配件 選項L（標準量程2-20daN） |
|
|
|
選項L |
省力槓桿（DTMX-20K和DTMX-50K標準配置） |
|
推薦型號DTMX-10K |
|
|
DTM-AC-115 |
交流適配器115VAV變壓為6VDC |
|
DTM-AC-230 |
交流適配器230VAV變壓為6VDC |
|
DTMX-P-115 |
印表機 RS232介面，可充電電池，充電器115VAV |
|
DTMX-P-230 |
印表機RS232介面，可充電電池，充電器230VAV |
|
DTMX-CA |
類比信號連接線（1.5m) |
|
DTMX-CP |
印表機連接線RS232（2m) |
|
DTMX-CC |
印表機連接線和適配器和連接PC的RS232端口（2m） |
|
DTMX-P2 |
Tensiorview軟件（WIN98及更高版本） |
|
|
|
圖為印表機、類比數據/序列連接線，適配器插頭，交流適配器 |
規格
|
精確度 其餘量程和不同於校正材料時 |
最佳量程（滿量程的10%-90%）的精度 ±0.5%的滿量程或±1個刻度盤刻度 ±3%的滿量程或±1個刻度盤刻度 |
|
過載量（約） |
15%的滿量程，無精度保證 |
|
過載保護 |
100% |
|
測量原理 |
應變測量電橋 |
|
測量輪偏差 |
最大0.2mm |
|
信號處理 |
數字式 |
|
測量頻率 |
62次/秒 |
|
顯示 |
4位LCD，12mm字高 |
|
刷新速度 |
0.5-1-2或4秒可選 |
|
|
最後，最小，最大，峰值 |
|
溫度範圍 |
10-45℃ |
|
空氣濕度 |
最大相對濕度85% |
|
電源 |
4*號AA電池1.5伏特（大約可持續使用20小時） |
|
外殼材料 |
模鑄鋁質 |
|
外殼尺寸 |
235*76*45(長*寬*高) |
|
淨重（毛重） |
型號-10K680g(1500g) 型號-20K-L及更高量程1000g(2200g) |
|
擴展內存 |
可存儲100個張力值，平均值，標準偏差值 |
|
數據輸出 |
RS232C（4800，8，N，2） |
|
類比輸出 |
0-1VDC（轉化速度16ms) |
|
數字化運算 |
Mitutoyo |
9 Tension ranges from 0.1 - 200 cN to 5 - 50 daN
Electronic tension meter for applications in textile and wire industry.
Special convenient for users aquiring additional process data to save them for example for a QM-system ISO9000ff
Model DTMX offers additional features to model DTMB:
- data memory
- statistical analysis
- interface for data printer and PC connection
Applications in textile industry: e. g. 50 up to max. 50000 tex
Applications in wire industry: e. g. 0.08 up to 2.2 O mm copper wire
4 different calibrations for customer supplied material can be saved at this tension meter
Applications in wire industry: e. g. 0.08 up to 2.2 O mm copper wire
4 different calibrations for customer supplied material can be saved at this tension meter
Special Features
Addtional features comparing model DTMX with basic unit model DTMB
- Memory for up to 100 tension values plus MIN, MAX, PEAK values
- automatic calculation of average and standard deviation
- all these data values can be recalled in the display or downloaded
to a printer or Personal Computer. - 2 Memory modes:
- continuous storage
- on-demand storage - Analog and serial interfaces
- Material selector switch for textile and wire applications (Tex and Wire) assures highest accuracy
- Calibration to customer supplied material is available (up to four different material calibrations)
Features model DTMB
- Microprocessor controlled tension meter for highest accuracy
- Measuring principle: double beam in bending with strain gauge
- Selectable update rates (0.5, 1, 2, or 4 seconds) to provide steady readings when tensions fluctuate (electronic damping)
- Measuring frequency: 62 measurements/second
- Built-in mounting holes permit fixed installation for online use
- The display shows averaged values calculated during the
update interval t1 e. g. every second 1 x - Saving MIN, MAX and PEAK values during a user-selected period. These values can be recalled at the display.
- Zero adjustment feature permits use of the tension meter in various measuring positions, maintaining highest accuracy
- Calibration to customer supplied material is available (up to two different material calibrations)
- Tension meter with built-in material thickness compensator improves accuracy for changing diameters (from tension range - 500 cN)
- Hand-held unit with built-in mounting holes permit fixed installation for online use
Standard Features
- Everything in operator’s view:
- the guide rollers
- the measured material
- the readings - Filament guide and roller shifting mechanism ensure easy acquisition of the running material
- Ball-bearing mounted, V-grooved guide rollers
- Tension meter with rugged aluminium housing
- Battery operated (AC adapter for continuous operation available)
- Certificate of Compliance with the order 2.1 according EN 10204 is included
- Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
Available Models
| Model | Tension Range cN |
Resolution | Measuring Head Width* mm |
Applications textil industry e.g yarn count |
Applications wire industry e.g. soft-annealed Cu-wire |
| DTMX-200 |
0.1 - 200.0 |
0.1 cN |
65 |
max. 200 tex |
max. 0.15 mm O |
| DTMX-500 | 0.1 - 500.0 |
0.1 cN |
65 |
20 - 500 tex |
0.05 - 0.25 mm O |
| DTMX-1000 | 50 - 1000 |
1 cN |
65 |
10 - 1000 tex |
0.10 - 0.40 mm O |
| DTMX-2000 |
200 - 2000 |
1 cN |
65 |
300 - 2000 tex |
0.30 - 0.60 mm O |
| DTMX-2500 | 250 - 2500 |
1 cN |
116 |
400 - 2500 tex |
0.30 - 0.60 mm O |
| DTMX-5000 | 500 - 5000 |
1 cN |
116 |
800 - 5000 tex |
0.40 - 1.00 mm O |
| DTMX-10K | 1.00 - 10.00daN |
0.01 daN |
116 |
1500 - 10000 tex |
0.70 - 1.20 mm O |
| DTMX-20K-L | 2.00 - 20.00daN |
0.01 daN |
216 |
2500 - 20000 tex |
1.00 - 2.00 mm O |
| DTMX-50K-L | 5.00 - 50.00daN |
0.01 daN |
216 |
6000 - 50000 tex |
1.80 - 2.20 mm O |
| Calibration: | According to SCHMIDT factory procedure |
| Accuracy: | From 10 % up to 90 % of tension range: ±0.5 % full scale and ±1 digit remaining tension range and other calibration materials: ±3 % full scale and ±1 digit |
| Overrange: | Approx. 15 % full scale, without accuracy guarantee |
| Overload protection: | 100 % |
| Measuring principle: | Strain gauge bridge |
| Measuring roller deflection: | Max. 0.2 mm |
| Signal processing: | Digital |
| Measuring frequency: | 62 measurement/s |
| Converter: | 12 bit A / D |
| Temperature coefficient: | Gain: less than ±0.01 % full scale/oC Zero point: less than ±0.3 % full scale/oC |
| Display: | LCD 4 digit, 12 mm high |
| Display update time: | Adjustable 0.5, 1, 2 oder 4 s (averaging) |
| Standard memory: | MIN, MAX, PEAK and last value |
| Extended: | Max. 100 displayed values, averaging and standard deviation |
| Memory mode: | Max. 100 values continuous automatically or max. 100 values on demand |
| Output signal: | Digital: RS 232 C (4800 bit/s) (serial) 8 Bit, no parity, 2 Stoppbits Digimatic: Mitutoyo Analog: 0 - 1 V DC, output frequency 16 ms |
| Field adjustment: | ±7 steps in 1.5 % increment |
| Temperature range: | 10 - 45 oC |
| Air humidity: | 85 % RH, max |
| Power supply: | 4 Batteries 1.5 V, size AA (approx. 20 h continuous use) |
| Auto. power off: | After 2 minutes of non-use |
| Housing material: | Die-cast aluminium |
| Housing dimensions: | 235 x 76 x 45mm (LxWxH) |
| Weight, net (gross): | Up to model DTMX-10K approx. 680 g (approx. 1500 g) From model DTMB-20K approx. 1000g (approx. 2200 g) |
