MemoRail是首款真正緊湊的數字式分析儀，可配合Memosens傳感器測量pH值、ORP、電導率、氧含量和温度。兩路模擬有源/無源4-20 mA輸出向過程控制系统或PLC提供過程值和温度的測量值。

即插即測量
MemoRail連接預校準的Memosens傳感器後即可進行測量。“使用過”的傳感器可以簡單地替換掉。

Memosens
利用預校準的傳感器和非接觸式Memosens技術，可以在最佳測量點上進行測量。校準不再是在現場進行，而是在可再現的條件下於實驗室中利用新的MemoSuite軟體工具進行。不同的傳感器數據始终直接分配給各Memosens傳感器。濕度、腐蝕或不良電流隔離等連接器問題已成為過去。

緊湊
MemoRail設備採用節省空間的模塊式外殼，寬度僅有12.5 mm。

多功能
MemoRail通過DIP開關進行配置，十分簡單，測量參數和範圍僅需設置一次。為了根據應用進行精密調整，它提供多種型號，包括具有一路或兩路有源或無源模擬電流输出的型號。該設備使用24 V DC或90-230 V AC電源，前者通過螺絲端子/總線連接器提供，後者通過集成的VariPower寬範圍電源提供。LED報告工作和傳感器狀態。

高性價比
MemoRail擁有出色的特性，能夠以較低的總成本建立測量站，尤其是搭配專門針對MemoRail而設計的現代Memosens傳感器。

應用
MemoRail為以下等應用提供物美價廉的替代解决方案：

• 飲用水
• 廢水、汙水處理廠
• 水族館、養魚池、溫室
• 發酵
• 清洗設備
• 洗車系統
• 水處理廠/設備

此外，MemoRail採用較窄的模塊式外殼，非常適合安裝在受限空間中，例如控制櫃、發酵槽中或船上。

MemoRail
原理

即插即测量
MemoRail向Memosens傳感器供電，將數字測量信號轉換為4-20 mA輸出電流，然後連接到過程控制系统或PLC。

校準、診斷、文檔處理
MemoSuite校準Memosens傳感器。附加功能是傳感器診斷和數據庫文檔處理。MemoLink建立Memosens傳感器與PC之間的連接。

MemoSuite
軟體工具

快速、方便
MemoSuite軟體能夠在實驗室對Memosens傳感器進行再現式校準。不再需要在現場的不利環境條件下進行校準。唯一需要做的事情是快速輕鬆地用預校準的傳感器換下使用過的傳感器。

兩種版本
MemoSuite基本版和MemoSuite高級版滿足不同的應用需求：

MemoSuite基本版校準Memosens傳感器。
MemoSuite高级版除校準外，還能執行傳感器診斷和數據庫文檔處理。
數據庫符合GMP和FDA CFR 21第11條的要求。

事實

• 模塊式外殼，12.5 mm寬
• 測量pH值、ORP、電導率、氧含量和溫度
• Memosens通信
• 2路4-20 mA電流輸出，有源或無源
• 24 V DC電源（螺絲端子或總線連接器）
  或VariPower寬範圍電源90-230 V AC
• 通過DIP開關輕鬆完成配置
• LED報告工作和傳感器狀態

Space-saving and low-cost DIN rail analyzer for use with Memosens sensors. All process parameters. Easy configuration. Measured value output via 2 standard current outputs. Also with Zone 2 explosion protection. Ideal in combination with the MemoSuite sensor management tool.

Facts

• Modular housing, 12.5 mm wide
• Measurement of pH value, ORP, conductivity, oxygen and temperature
• Memosens communication
• 2 current outputs 4 to 20 mA, active or passive
• 24 V DC  power supply (screw terminals or bus connection) or
  VariPower broad-range power supply, 90 to 230 V AC
• Simple configuration via DIP switches
• LEDs report operating and sensor states

MemoRail is the first genuinely compact, digital analyzer for measuring pH values, ORP, conductivity, oxygen and temperature with Memosens sensors. Two analog active / passive 4 to 20 mA outputs supply the measurement values for process value and temperature to the process control system or a PLC.

Plug & Measure
MemoRail is immediately ready for measurement on connecting a precalibrated Memosens sensor. “Used” sensors can simply be replaced.

Memosens
Optimum availability of the point of measurement is achieved by using precalibrated sensors with contactless Memosens technology. Calibration is no longer carried out on site but under reproducible conditions in the laboratory with the new MemoSuite software tool. Separate sensor data are always directly assigned to each Memosens sensor. Problems at the connector involving humidity, corrosion or even defective galvanic isolation are a thing of the past.

Compact
The highly space-saving modular housing of the MemoRail devices is only 12.5 mm wide.

Versatile
With its simple configuration via DIP switches, MemoRail is set up only once for the measurement parameters and ranges. For precise adjustment to the application, a range of variants is available, including models with one or two analog current outputs which can be active or passive. The unit is supplied with 24 V DC via screw terminals / bus connec-tors or with 90 to 230 V AC via the integrated VariPower broad-range power supply. LEDs report operating and sensor states.

Cost-Efficient
The outstanding properties of MemoRail enable the implementation of measurement stations with low overall costs, especially in combination with modern Memosens sensors specially tailored for use with MemoRail.

Applications
MemoRail offers economical alternatives in applications such as:

• drinking water
• wastewater, sewage plants
• aquaria, fish farms, greenhouses
• fermentation
• rinsing equipment
• car wash systems
• water treatment plants/equipment

Furthermore, with its narrow modular housing, MemoRail is perfectly suited to installation in restricted spaces – e.g. in control cabinets, fermenters, or on ships.

MemoSuite - The Software Tool

Fast and User-Friendly
The MemoSuite software enables reproducible calibration of Memosens sensors in the laboratory. Calibration under adverse ambient conditions on site is no longer necessary. The only thing required there is the quick und uncomplicated replacement of the sensors for precalibrated sensors.

Two Versions
MemoSuite Basic and MemoSuite Advanced meet different application-specific requirements:

MemoSuite Basic
calibrates Memosens sensors.

MemoSuite Advanced
also executes diagnostics and database documentation of the sensors. The database complies with the requirements of GMP and FDA CFR 21 Part 11.