Ozone-testing 臭氧環境試驗箱
Ozone-testing
臭氧環境試驗箱
Ozone testing systems
廠牌：ANSEROS/Germany
供應商：建成科學儀器股份有限公司
聯絡電話：02-29103818
| 快速詢價 |
行動條碼QR Code
建成科學儀器股份有限公司；
ANSEROS/Germany；
其他水質環境污染防止關聯機器及器材；
材料耐候試驗臭氧環境實驗裝置
SIM-POCKET APPLICATIONS
The Ozone Test Chamber SIM pocket is designed to check and compare different probes of rubber under the influence of ozone.
SIM-6300 APPLICATIONS
Ozone is naturally occurring triatomar oxygen, typically present in atmospheric concentrations up to 10 - 15 parts per hundred million (pphm) of air, and occasionally higher. Even at these low levels, ozone reacts readily with unsaturated elastomers, promoting cracking and possible failure of rubber parts in service.
Ozone test chambers provide an effective means of assessing the resistance of rubber compounds to ozone degradation under controlled atmospheric conditions.
OZONE TEST CHAMBERS
ANSEROS only manufactures stainless steel inlets available in volume ranging from 35 to 8,000 litres. The air velocity inside the chamber reaches 600mm/sec. driven by an additional fan. The operation of the cabinet is according to DIN 53509, with air inside the chamber being replaced three times per hour, and the required ozone concentration being achieved within 30 minutes from the commencement of the test or change in setpoint (NB: ASTM requirements slightly differ from this).
Generally, four types of static and dynamic test equipment can be installed in ANSEROS ozone chambers:
- Static test without rotation.
- Dynamic test without rotation.
- Static test with rotation.
- Dynamic test with rotation.
Key Benefits
- Stable ozone supply without deterioration of the generator electrodes with time.
- Calibration-free spectroscopic ozone measurement, requiring no chemicals.
- Exhaust gas catalyser, eliminating discharge of ozone into the atmosphere, for a safe environment.
- Continuous unattended operation.
Ozone test chambers for rubber ageing:
- Quality tests and approvals.
- Design of new mixtures.
- Increasing performance.
- Study of antioxidants and efficiency.
Most popular standards:
- DIN 53509 Static strain.
- ISO 1431/1 Static strain.
- ISO 1431/2 Dynamic strain.
- ASTM D1149 Ozone cracking.
- ASTM D518
- ASTM D1171
- ASTM D4574
- ASTM D3395 Dynamic strain.
SIM-POCKET APPLICATIONS
The Ozone Test Chamber SIM pocket is designed to check and compare different probes of rubber under the influence of ozone.
- Nominal Ozone Capacity: 30 mg/h.
- Max. Ozone Concentration: 1 g/Nm³.
- Chamber volume: 6.8 liters.
- Dimensions: W 260 x H 120 x D 220 mm.
SIM-6050 APPLICATIONS
Ozone test chambers provide an effective means of assessing the resistance of rubber compounds to ozone degradation under controlled atmospheric conditions.
Standard Testing Systems:
- 50 litre test cabinet.
- Ozone generator, analyser and controller.
- Temperature control.
- Exhaust gas catalyser.
- Particle filter, carbon and gas filter.
SIM-6300 APPLICATIONS
Ozone is naturally occurring triatomar oxygen, typically present in atmospheric concentrations up to 10 - 15 parts per hundred million (pphm) of air, and occasionally higher. Even at these low levels, ozone reacts readily with unsaturated elastomers, promoting cracking and possible failure of rubber parts in service.
Ozone test chambers provide an effective means of assessing the resistance of rubber compounds to ozone degradation under controlled atmospheric conditions.
Advanced technology for efficient ozone resistance testing in the rubber industry.
- Sensitive and reliable ozone generation, measurement and control.
- Temperature and humidity control.
- Testing rigs for tension and bending, in static, dynamic and static+dynamic modes.
- Unattended, continuous operation.
- Optional remote operation via PC, with Internet access if required.
- Test chambers for small laboratory samples or large moulded products.
- Custom systems for maximum flexibility.
Retrofit ozone generation and control modules available for existing test chambers.
SIM-8000 APPLICATIONS
A tyre life testing solution based on ozone climate control. Optional test equipment like UV radiation and fogging, Rotation and dynamic tools can be built-in. Inside coating in stainless steel, welded. Wide tight doors (with safety system) for movement of heavy goods. Remote control of all test ranges. Full automatically operated with synthesizing and synchronisation. Software for data storage, internet compatible.
- Ozone climate control.
- Optional test equipment like UV radiation and fogging.
- Rotation and dynamic tools can be built in.
- Inside coating in stainless steel, welded.
產品關鍵字：
.jpg)
