H-1250 / H-1240 / H-1200 針入度試驗器 H-1250 / 1240 / 1200
H-1250 / H-1240 / H-1200
針入度試驗器 H-1250 / 1240 / 1200
Penetrometers H-1250 / 1240 / 1200
廠牌：代理
供應商：大台北尖端儀器有限公司
聯絡電話：02-2531-0981
| 快速詢價 |
行動條碼QR Code
H-1200萬用針入度試驗儀
指示刻度盤的直徑為127mm，刻度盤分劃400個分度，每分度為0.1mm，最大針入度為40mm。在試驗前先調零，防止試驗結果不正確。連桿重47.5g，有3.2mm大的小孔；兩個砝碼(50g和100g)。尺寸：10-1/2×13×22」(266.7×330.2×558.8mm)，符合ASTM D5、D217、D1168、D1191、D1321、D1403、D1831、D1855標準。
H-1200 Universal Penetrometer
針入度試驗儀 Penetrometer
針入度(Penetration)又稱錐入度或硬度，其為測定潤滑脂或瀝青軟硬程度；其方式為硬度錐自由落體落入油平面5秒鐘所插入的深度，針入度愈大表示潤滑脂愈軟，即稠度愈小；反之則表示潤滑脂愈硬，即稠度愈大。瀝青的針入度測定，不用標準圓錐體而用載重共100克的標準尖針。測定的條件與潤滑脂相同。
針入度(Penetration)又稱錐入度或硬度，其為測定潤滑脂或瀝青軟硬程度；其方式為硬度錐自由落體落入油平面5秒鐘所插入的深度，針入度愈大表示潤滑脂愈軟，即稠度愈小；反之則表示潤滑脂愈硬，即稠度愈大。瀝青的針入度測定，不用標準圓錐體而用載重共100克的標準尖針。測定的條件與潤滑脂相同。
H-1200萬用針入度試驗儀
指示刻度盤的直徑為127mm，刻度盤分劃400個分度，每分度為0.1mm，最大針入度為40mm。在試驗前先調零，防止試驗結果不正確。連桿重47.5g，有3.2mm大的小孔；兩個砝碼(50g和100g)。尺寸：10-1/2×13×22」(266.7×330.2×558.8mm)，符合ASTM D5、D217、D1168、D1191、D1321、D1403、D1831、D1855標準。H-1200 Universal Penetrometer
Direct reading unit accurately determines consistency of bituminous materials, cement, petrolatum and waxes, as well as food, cosmetic, and pharmaceutical products. Unit has accurately machined aluminum base with grooved table surface ground to ±.005" (0.127mm) and stainless steel support guide rods perpendicular to the base for rigidity. Built in spirit level has two adjusting leveling screws. Cast aluminum head features fine adjustment, plunger mechanism and depth gage. Dust-proof 5" (127mm) dia. indicator dial is graduated into 400 divisions of 0.1mm, corresponding to 40mm penetration, and has zero reset to eliminate errors.
Locking collar or plunger weighs 47.5g and is supplied with 1/8" (3mm) dia hole for use with standard needles. Two additional loading weights (50g and 100g) mount on base when not in use. One H-1280 penetration needle (2.5g) is furnished. Overall dimensions: 10-1/2x13x22". Meets ASTM D5, D217, D1168, D1191, D1321, D1403, D1831, D1855: AASHTO T49, T187: others Shpg wt. 30 lbs. (13.6kg). Cube. cont. 4 cu ft. NOTE: Special cones and needles available on request.
H-1250 便攜式針入度試驗儀
類似H-1200但較輕且尺寸較小，便於實地工作。易於攜帶及拆卸。附一個50gm砝碼。
H-1250 Portable Penetrometer
Similar to H-1200 but lighter and smaller size for field work. Micrometer adjustment for accurate settings as well as coarse adjustment for approximate settings.
Easy to disassemble. Also, only one additional 50gm. loading weight is furnished. Over-all dimensions, 7" x 7" x 16"H (178mm x 178mm x 406mm) Meets same specifications as H-1200
Shpg wt 8 lbs. (3.6kg). Cube cont. 2 cu. ft.
H-1202 Penetrometer (Battery Paste Preparation & Plate Control)
This instrument (similar to H-1200) offers a rapid, direct, and accurate determination of battery paste consistency. Included is a 50 and 100 gram weight, a special plunger and cone-shaped penetrating needle. Shpg. wt. 30 lbs. (13.6kg.) Cube. cont. 4 cu. ft.
H-1240 電子針入度試驗儀
全自動型，數字計時器帶鬆開裝置，單位可秒、分鐘或小時。計時器的時間間隔可設置為1/10秒。連桿由按鈕控制，啟動後會根據設置的貫入時間自動停機。H-1240.5F電壓為230V，頻率為50Hz，其餘性能同H-1240。
特點：
1、開始操作後，依據設立的貫入時間，自動停機；
2、貫入深度分辨率為0.1mm,量程為40mm；
3、時間計時器數字顯示：0.1-9.9秒，0.1-9.9分，0.1-49.9小時可選
H-1240 Electric Penetrometer
Automatic unit for penetration tests described for H-1200 Penetrometer. Digital timer, with release mechanism, is switchable to seconds, minutes or hours. Timer can be set in 1/10th second intervals from 0.1 seconds to 09.9 seconds, 0.1 min. to 09.9 min. and 0.1 hr to 09.9 hrs. Plunger releases with push of a button and automatically stops after the preset time duration is achieved.
Models
H-1240 Electric Penetrometer 110/60/1ph. AC
H-1240.5F 220V/50/60Hz Electric Penetrometer is same as H-1240 and includes voltage adapter and internal switch on tuning mechanism to change cycle to 50Hz.
Shpg. wt. 32 lbs. (14.5kg) Cube cont. 4 cu. ft.
H-1252 可攜式電池漿料針入度試驗儀
H-1252 Portable Battery Paste Penetrometer
A light weight compact model (similar to H-1250) supplied with the same special plunger and cone-shaped penetrating needle and one 50gm weight. Shpg wt. 8 lbs. (3.6kg). Cube cont. 2 cu. ft.
H-1252 Portable Battery Paste Penetrometer
A light weight compact model (similar to H-1250) supplied with the same special plunger and cone-shaped penetrating needle and one 50gm weight. Shpg wt. 8 lbs. (3.6kg). Cube cont. 2 cu. ft.
H-2510 油脂瀝青針入度試驗儀
適用於硬潤滑油脂及軟性瀝青的針入度試驗。配備H-2520油脂針入度圓錐探針。
H-2510 Grease Penetrometer
Determines the consistency of hard lubricating grease and soft petrolatum. Same as improved Humboldt H-1200 Universal Penetrometer, except furnished with an H-2520 Grease Penetration Cone.
Meets ASTM D217, D937; IP50: ASA Std. A11.3.
Shpg. wt. 30 lbs. (13.6kg.) Cube cont. 4 cu. ft.
|
For use with Models H-1200, H-1240, H-1250, and other Penetrometers |
|
|
|
Technical Data |
|||
|
Model |
Applications |
Description |
Meet Specs. |
|
H-1280 |
BITUMINOUS Materials |
Hardened stainless steel needle, brass ferrule, 3.2mm dia. Wt. 2.5gm |
ASTM D5: AASHTO T49, IP49; ASA Std., |
|
H-1300 |
Same as H-1280. Certified for accuracy by independent laboratory |
||
|
H-1310 |
WAXES with 250 or more penetration |
Hardened stainless steel wax penetration needles with tapered point, hollow shaft, blunt tip of truncated cone. Ferrule is approx. 2.3mm dia. Wt. 2.5g |
ASTM D1321 |
|
H-1317 |
Same as H-1310, but with certification by independent laboratory. |
||
|
H-1255 |
BATTERY Paste |
Hardened stainless steel tip with special plunger. Total wt. 60 gm ±.050g. |
N/A |
|
H-2520 |
GREASE-testing penetrometers |
Hollow 90° brass cone, highly polished stainless steel tip. Removable nut and stem. Wt. 102.5g. |
ASTM D217, D937; ASA Std. Z11.3 |
|
H-2522 |
Same as H-2520, except stainless steel. Wt. 102.5g |
||
|
H-2525 |
REPLACEMENT tip, nut & stem for H-2520 cone |
Stainless Steel. Total weight meets prescribed ASTM requirements. |
|
|
H-2524 |
GREASE-testing penetrometers |
Magnesium cone and plunger, same dim. as H-2520. Total wt. cone and plunger 30.0g. |
ASTM D2884 |
|
H-2529 |
FOOD products & paste paints |
Aluminum.Same dimension as H-2520. Total wt. 35g. |
U.S. Dept. of Agriculture |
|
H-1270 |
Measuring firmness of solid and plasticized FATS (shortenings, margarine, butter, etc). |
10° aluminum cone 1/8" (3.2mm) ferrule, 1/32" (0.8mm) stainless steel blunt tip Overall length 4-3/16" (106mm) Wt. 45gm |
AOCS cc-16-60 |
|
H-2519 |
SMALL obtainable samples (i.e. recovery of used grease) |
1/4 scale. (not considered a substitute for full-size cone specified in ASTM D217.) Wt. 9.38g |
ASTM D1403 |
Available Items
|
Item Number |
Item |
|
PE-H-1200 |
Universal Penetrometer, with H-1280 needle |
|
PE-H-1202 |
Penetrometer, with H-1255 cone shaped needle |
|
PE-H-1240 |
Electric Penetrometer, 110V/60Hz/1pH, with H-1280 needle |
|
PE-H-1240.5F |
Electric Penetrometer, 220V/50Hz/1pH |
|
PE-H-1250 |
Portable Penetrometer with H-1280 needle |
|
PE-H-1252 |
Portable Battery Paste Penetrometer |
|
PE-H-2510 |
Grease Penetrometer, with H-2520 brass cone |
|
PE-H-1280 |
Penetrometer Needle, ASTM D5 |
|
PE-H-1300 |
Penetrometer Needle, ASTM D5, with certification |
|
PE-H-1310 |
Wax Penetrometer needle, blunted cone tip |
|
PE-H-1317 |
Wax Penetrometer needle, blunted cone,w/certification |
|
PE-H-1270 |
20" Aluminum cone, s/s blunt tip |
|
PE-H-2519 |
1/4 scale cone, ASTM D1403 |
|
PE-H-2520 |
Hollow 90 brass cone, ASTM D217 |
|
PE-H-2522 |
Grease cone, hollow s/s, ASTM D217 |
|
PE-H-2524 |
Grease cone, hollow, Magnesium, ASTM D 2884 |
|
PE-H-2525 |
Tip, Nut & Stem only for H2520 |
|
PE-H-2529 |
Aluminum cone, Food & Paste |
|
PE-H-2600.17F |
Thermometer 66-80F (ASTM 17F) |
|
PE-H-2600.63F |
Thermometer 18-89F (ASTM 63F) |
|
PE-H-2600.64F |
Thermometer 77-131F (ASTM 64F) |
|
PE-H-2610.17C |
Thermometer 19-27C (ASTM 17C) |
|
PE-H-2610.63C |
Thermometer -8 to 32C (ASTM 63C) |
|
PE-H-2610.64C |
Thermometer 25-55C (ASTM 64C) |
