大台北尖端儀器有限公司

JH-B1 泡殼成形自動包裝機

JH-B1

泡殼成形自動包裝機

Blister forming and automated packing machine

廠牌:瑾耀企業集團
供應商:瑾耀企業集團
聯絡電話:02-26320212 02-22934030
定價:與我們聯絡

快速詢價

17448

行動條碼QR Code
泡殼成形自動包裝機-行動條碼QR Code

 

 

JH-B1 泡殼成形自動包裝機

 

 

JH-B1 泡殼成形自動包裝機應用了最新科技設計,使得此機價格低廉,耗材低廉,運轉成本低廉,但是成本效率卻是最高的。精準的碇劑 / 膠囊自下料系統及自動檢測系統使得本機全天候運轉祇需一人即可。

JH-B1 可適用於碇劑、糖衣 / 膜衣碇、硬膠囊、軟膠囊的 PTP包裝。
特性如下
1. 此機採連續式的旋轉運動非間斷式的往復運動,故無衝擊及噪音,運轉流暢。
2. 碇劑包裝可打橫貫的切線。
3. 採鐵弗龍蒸鍍的加熱板,接觸加熱 P.V.C 膜,使得加熱溫度較低,加熱材料均勻性較佳,運轉速度較穩定。
4. 全機採 SUS 304 不鏽鋼外殼被覆,保證符合 G.M.P 要求標準。
5. 邊對邊的切斷方式,中間沒有材料浪費,至少省 6% 以上的包材成本。
6. 狀況監視器可顯示停機原因,如 P.V.C 鋁箔不足、加熱器故障等。
7. 換模調整準備時間不超過 1 小時,其中包含機換模、清潔、調整。

 

產品規格
週   期   時  間 最大運轉速度每分鐘 40 週期。
P.V.C  容   量 最大可到 130mm 寬 * 350micron 厚。
每片成形面積 最大可到 115 * 65mm。
抽  拉  深  度 孔深標準為 12mm。

 

尺寸
2150mm 
1150mm
1800mm
950kg
電力 220 / 240      3相      50 / 60Hz 
能源消耗 4.2kw   空氣 200L / min  at  5kg / cm

 

主機主要元件如下: BLISTER PACKING MACHINE
機架:機械驅動機構與氣壓驅動結構。

包材進料系統與拉料輪
手工下料軌道板
鋁箔進料系統
切線站
振動下料系統 / 膠囊自動選料下料系統
控制面板與監視系統
P.V.C 預熱板
熱成形系統 ( 高壓空氣成形 )
熱封系統    打字 / 批號    機構
成品計數器    切斷模    P.I.D 溫度控制器

 

 

JH-B1 Blister forming and automated packing machine

 

 

The JH-B1 blister forming and automatic packing machine adopts the latest high-tech design that allows the cost of the servo to be affordable, with inexpensive supplies, low operating cost, yet with a maximum cost-return ratio.  The automated precision tablet/capsule download system and automated screening system allow the servo to operate round-the-clock, while manned by only one operator. 

The JH-B1 servo is compatible for PTP packing of tablets, sugar-coated/membrane-coated tablets, hard capsules, and soft capsules.
 

Its feature is as follows
1. The servo operates on a continuous rotation motion of a non-interrupted repetitive motion to be free of impact, noise, and runs smoothly.
2. Option to incorporate row-wide perforation in tablet packing.
3. Comes with Teflon plated heating board and contact heated PVC membrane to allow a lower heating temperature, optimal even heating, and stable rotation speed.
4. The servo housing is built of SUS 304 stainless steel and is guaranteed to meet G.M.P. demand criteria.
5. A diagonal trim-off method that does not create intermittent material waste to help conserve at least 6% in packaging cost.
6. The status monitor prompts causes leading to servo pauses, i.e. low PVC foil, heater malfunction, etc.
7. Mold adjustment and prepping guaranteed to be less than one hour, including servo mold change, cleaning and adjustment.

 

Product specification
Cycle timing maximum rotation speed at 40 cycles per minute.
PVC capacity maximum up to130mm in width and 350 micron in thickness
Area of each blister formed Maximum up to 115*65mm.
Depth of draw Standard hole depth at 12mm.

 

Dimensions
Dimensions 2150mm in length, 1800mm in height, 1150 in width
Weight 950kg
Power rating 220/240V, 3§, 50/60 Hz
Power consumption 4.2kw Air: 200L/min at 5 kg/cm

 

The servo’s main components comprised of BLISTER PACKING MACHINE
Equipment mount: for the mechanical transmission mechanism and pneumatic pressure transmission mechanism

Packing material feeding system and material dispensing wheel
Manual material unloading panel
Aluminum foil feeding system
Line cutting station
Vibrating material unloading system/automated capsule sorting and unlading system
Control panel and monitoring system
PVC preheating panel
Heat forming system (pressurized air forming)
Heat sealing system, typeset/lot number imprint mechanism
Complete product counter, trim-off mold, PID temperature controller

您也可能對以下商品有興趣...

產品關鍵字:

志尚儀器股份有限公司

最新廠商動態!

OMEGA ENGINEERING ;OMEGA代理;熱電偶接頭;熱電偶線;感溫線;偉吉達;
WHATMAN代理空氣採樣濾紙;玻璃纖維濾紙;G/A GF/B GF/C暨相關過濾素材; 2020 Cytiva代理Whatman濾膜及耗材;
不銹鋼三層推車;不銹鋼二層推車;實驗室推車;歡迎同業洽詢;
BROOKS質量流量控制器;PC540;BROOKS代理;質量流量控制器;BROOKS 5850E;
OMEGA ENGINEERING ;OMEGA 代理商;熱電偶接頭;熱電偶導線;熱電偶公母接頭;熱電偶感溫線;

更多

最新儀器!

力明儀器有限公司

Copyright © 2006-2017 tw17 All rights reserved.
Design: 台灣儀器網

台灣儀器網Tw17 行動條碼QR Code