志尚儀器股份有限公司

EN ISO 1716 氧彈熱卡計 EN ISO 1716

EN ISO 1716

氧彈熱卡計 EN ISO 1716

Bomb Calorimeter EN ISO 1716

廠牌:代理
供應商:大台北尖端儀器有限公司
聯絡電話:02-2531-0981
定價:與我們聯絡

快速詢價

4083

行動條碼QR Code
氧彈熱卡計 EN ISO 1716-行動條碼QR Code

氧彈熱量計

 

EN ISO 1716

 

傳統的可移動氧彈和水桶設計以及該熱量計的水防護套使用戶可以完全控制燃燒過程。 這使得6200成為進行EN ISO 1716:2010測試時所需的精確研發和質量控制工作的最終選擇。

 

規格與功能

Isoperibol防護套系統

內建高容量泵驅動的循環水系統提供出色的熱保護套,該泵在桶的的側面和底部以及蓋子上保持連續的強制流動。均由熱量計控制器操作的密封浸入式加熱器和內建式熱交換器可提供精確的防護套溫度控制。

 

半自動充氧

為了加快和簡化氧彈的裝填操作,6200熱量計具有半自動系統,可為氧彈充氧。氧氣連接到熱量計中安裝的微處理器控制的螺線管。要填充氧彈,操作員只需將填充軟管連接器滑到氧彈入口閥上,然後按觸摸螢幕即可開始填充程序。

 

實驗室要求

熱量儀需要使用99.5%的氧氣和去離子水進行操作。如果選擇了循環系統,則水處理系統必須安裝在量熱儀的左側。

 

擴充系統

6220擴充系統包括以下組件:

•6200熱量計

•6510水處理系統

•1758印表機

•額外的氧彈和水桶

•6008氧彈維護套件

•6209B,1年服務套件

 

技術數據和要求

型號:6200

電氣:110至230 volt – 5 amps

環境溫度:工作溫度10°C至35°C

尺寸:570mm(W)x 430mm x(H)x 400mm(D)

每小時測試:6 – 8

每次測試的操作時間:6分鐘

精度等級:0.1%級

防護套類型:Isoperibol,水防護套

氧氣填充:半自動

桶填充:手動

氧彈清洗:手動

氧彈型號選項:1108,合金20、1108CL,合金G30、1108P,合金20,半永久線,1108PCL,合金G30,半永久線1109A,22mL半微型氧彈,1104(B),高強度氧彈。

平衡通訊:RS232C端口

印表機通訊:RS232C端口

網絡連接:通過乙太網路的TCP / IP

bomb-2.jpg

bomb-3.jpg

 

 


 

Bomb Calorimeter

 

EN ISO 1716

 

The traditional removable bomb and bucket design along with the water jacket of this calorimeter, afford the user with complete control over the combustion process.  This makes the 6200 the ultimate choice for precise research and development and quality control work required when testing to EN ISO 1716:2010.

 

Specification & Features

Isoperibol Jacket System

Outstanding thermal jacketing is provided by a circulating water system driven by a built-in, high capacity pump which maintains a continuous forced flow around the sides and bottom of the bucket chamber and through the cover as well. A sealed immersion heater and a uilt-in heat exchanger, both operated by the calorimeter controller, provide precise jacket temperature control.

 

Semi-Automatic Oxygen Fill

To speed and simplify the bomb filling operation, the 6200 Calorimeter has a semiautomatic system for charging the bomb with oxygen. Oxygen is connected to a microprocessor controlled solenoid installed in the calorimeter. To fill the bomb, the operator simply slips the filling hose connector onto the bomb inlet valve and pushes the touch screen to start the filling sequence.

 

Laboratory Requirements

The calorimeter requires a source of 99.5% oxygen and deionized water for operation. If a closed loop system is chosen, the water handling system must be installed to the left of the calorimeter.

 

Expanded System

The 6220 Expanded System includes the following components:

•6200 Calorimeter

•6510 Water Handling System

•1758 Printer

•Extra Bomb and Bucket

•6008 Bomb Maintenance Kit

•6209B, 1 Year Service Kit

 

Technical Data & Requirements

Model Number: 6200

Electrical: 110 to 230 volts – 5 Amps

Ambient Temperature: Operating 10°C to 35°C

Dimensions: 570mm (W) x 430mm x (H) x 400mm (D)

Tests Per Hour: 6 – 8

Operation Time Per Test: 6 Minutes

Precision Classification: 0.1% Class

Jacket Type: Isoperibol, Water Jacket

Oxygen Fill: Semi-Automatic

Bucket Fill: Manual

Bomb Wash: Manual

Bomb Model Options: 1108, Alloy 20, 1108CL, Alloy G30, 1108P, Alloy 20, Semi-permanent Wire, 1108PCL, Alloy G30, Semipermanent Wire 1109A, 22mL Semi-micro Bomb, 1104(B), High Strength Bomb.

Balance Communication: RS232C Port

Printer Communication: RS232C Port

Network Connection: TCP/IP via Ethernet

 

您也可能對以下商品有興趣...

產品關鍵字:

大台北尖端儀器有限公司

最新廠商動態!

世界上體積最小,耗電量最低的攜帶型雷射光譜氣體分析儀
WHATMAN代理美國過濾耗材知名大廠;Cytiva代理WHATMAN耗材在2020年;代理濾膜;濾紙;空氣採樣濾紙;
BROOKS質量流量控制器;PC540;BROOKS代理;質量流量控制器;BROOKS 5850E;
OMEGA ENGINEERING ;OMEGA 代理商;熱電偶接頭;熱電偶導線;熱電偶公母接頭;熱電偶感溫線;
Membrance Solution (USA) 0.22um/ 0.45um PES/ PVDF 針桶過濾膜特價供應

更多

最新儀器!

力明儀器有限公司

Copyright © 2006-2017 tw17 All rights reserved.
Design: 台灣儀器網

台灣儀器網Tw17 行動條碼QR Code